Tooling for parts production
416 results for 'Tooling for parts production'
Manual chuck adapter, Macro-MacroJunior
3R-466.10033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Reference element 70x70 mm, MacroHP
3R-601.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element Ø75 mm, Macro
3R-651.75E-P
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.