Tooling for parts production

3R-651.7E-XS

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

S220400

Contains all elements for a normal service.

3R-680.24-S

Low profile pneumatic chuck for permanent mounting on the machine spindle or table. Note: Master pallet 3R-606.1 or 3R-686.1-HD is required at installation.

3R-680.1-2

Pneumatic chuck for machine spindles and lathes. Opened/locked by an air gun against a valve on the side, or alternatively on the back, of the chuck.

3R-680.24-V

Manual vibration-damped table chuck.

3R-680.10-2

Pneumatic table chuck.

3R-680.10-2RS

Rust resistant pneumatic table chuck.

3R-680.19-2

Pneumatic table chuck with 3Refix-holes.

3R-680.10-2A

Pneumatic table chuck for chuck adapter.

3R-680.10-2ARS

Rust resistant pneumatic table chuck for chuck adapter.

3R-SP33136

Pneumatic chuck with coarse guiding of the pallet. Intended for permanent building-in.

3R-SP33136-RS

Rust resistant pneumatic table chuck.