Tooling for EDM

3R-901-10E-TX

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-SP7359-RS

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-A27634

To convert 3R-600.28-S to enable long drawbar 3R-605.1.

3R-699.20-110D

The pallet can be flipped over to gain access from rear side.

3R-SP31380-RS

Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.

3R-696.1-110

For setting flatness and angular positions.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-SP30752

From Matrix142 to Capto C6 system.

3R-SP30997

From Matrix142 to Macro system.

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.