Tooling for parts production
416 results for 'Tooling for parts production'
Pneumatic built-in chuck, Matrix142
3R-SP28219
Chuck for permanent mounting in the machine table or into a PM press.
Reference element Ø142 mm, MacroMagnum
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Drawbar, Matrix142
3R-695.2-142
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix185
3R-695.2-185
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix220
3R-695.2-220
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix260
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Clamping force meter kit, Macro
3R-SSP115-BASE
For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.
Lathe taper
3R-TXXXX
Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.
Angle shelf
3R-A21944
For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.