- Metallic cylinders, squares, plates etc… are used to form electrodes for EDM Die Sinking machining
- Principal advantages :low wear, high contour sharpness, good machinability
Specs
Specs
Metallic electrodes | |
|---|---|
| Length (mm) |
|
| Quantity / Pack |
|
| Thickness (mm) |
|
| Tolerance (mm) |
|
| Width (mm) |
|
Variants
Reference | Identifier | Length (mm) | Width (mm) | Thickness (mm) | Quantity / Pack |
|---|---|---|---|---|---|
| 951400030 | Plate W/Cu 75/25 - 3 X 75 X 200 | 200 | 75 | 3 | 1 |
| 951400040 | Plate W/Cu 75/25 - 4 X 75 X 200 | 200 | 75 | 4 | 1 |
| 951400050 | Plate W/Cu 75/25 - 5 X 75 X 200 | 200 | 75 | 5 | 1 |
| 951400051 | Plate W/Cu 75/25 - 5 X 75 X 100 | 100 | 75 | 5 | 1 |
951400060 | Plate W/Cu 75/25 - 6 X 75 X 200 | 200 | 75 | 6 | 1 |
| 951400061 | Plate W/Cu 75/25 - 6 X 75 X 100 | 100 | 75 | 6 | 1 |
| 951400080 | Plate W/Cu 75/25 - 8 X 75 X 200 | 200 | 75 | 8 | 1 |
| 951400100 | Plate W/Cu 75/25 - 10 X 75 X 200 | 200 | 75 | 10 | 1 |
| 951400101 | Plate W/Cu 75/25 - 10 X 75 X 100 | 100 | 75 | 10 | 1 |
| 951400120 | Plate W/Cu 75/25 - 12 X 75 X 200 | 200 | 75 | 12 | 1 |
| 951400121 | Plate W/Cu 75/25 - 12 X 75 X 100 | 100 | 75 | 12 | 1 |
| 951400150 | Plate W/Cu 75/25 - 15 X 75 X 200 | 200 | 75 | 15 | 1 |
| 951400151 | Plate W/Cu 75/25 - 15 X 75 X 100 | 100 | 75 | 15 | 1 |
| 951400200 | Plate W/Cu 75/25 - 20 X 75 X 200 | 200 | 75 | 20 | 1 |
| 951400201 | Plate W/Cu 75/25 - 20 X 75 X 100 | 100 | 75 | 20 | 1 |
| 951400250 | Plate W/Cu 75/25 - 25 X 75 X 200 | 200 | 75 | 25 | 1 |
| 951400251 | Plate W/Cu 75/25 - 25 X 75 X 100 | 100 | 75 | 1 | 1 |
| 951400500 | Plate W/Cu 75/25 - 50 X 75 X 200 | 200 | 75 | 50 | 1 |
There are no documents available for this product.