Tooling for parts production
416 results for 'Tooling for parts production'
Lathe taper
3R-TXXXX
Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.
Angle shelf
3R-A21944
For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.
Adapter plate
3R-A19724
For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.
3Refix mandrel, 3Refix
3R-901-20E
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Slotted bushes, 3Refix
3R-903-20.235
Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm
3Refix mandrel, 3Refix
3R-901-20RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Reference tables, 3Refix
3R-936-85.40
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
Slotted bushes, 3Refix
3R-903-20.254
Bushes of hardened spring steel 54 HRC. Outside diameter 25.4 mm