Tooling for EDM
397 results for 'Tooling for EDM'
Reference element Ø75 mm, Macro
3R-651.75E-P
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Gate chuck, Macro
3R-US90-601
Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.
Measuring probe, Macro
3R-656.31-3P
Measuring probe with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10° Y-Axis ±10° Z-Axis ±3 mm.
Measuring probe, Macro
3R-656.31-5P
Measuring probe with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10° Y-Axis ±10° Z-Axis ±3 mm.
Measuring probe, Macro
3R-656.21-SP03
Measuring probe with measuring head for machines with measurement cycle function.