Tooling for wire EDM
144 results for 'Tooling for wire EDM'
Spacer element 30 mm, Wire EDM
3R-223
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Spacer element 30 mm, Wire EDM
3R-223.3
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
Swivelling element 360°, Macro
3R-203.66
Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
Swivelling element 360°, Macro
90937
Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
Swivelling element 360° with encoder, Macro
D-30232
Swivelling element with manual Macro chuck. Display included.
Vertical fixed adapter, Macro
3R-226.6
For horizontal clamping SuperVice and holders in vertical Macro chucks.
Vertical levelling adapter, Macro
3R-262.6
For horizontal mounting of SuperVice and holders in vertical Macro chucks.
Angle Tool, Macro, Wire EDM
D-30215
Angle tool, Macro with vernier scale -90º to 0 to +90º. Note: Macro chuck is required on the machine table for clamping.
3R-block, Macro, Wire EDM
3R-217-1
Manual Macro chuck. For vertical or horizontal mounting on the machine table, or alternatively the WEDM system with the aid of 3R-SP6435.
Angle shelf, Wire EDM
3R-201.5
Mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine.
Machine-adapted B-axis, Wire EDM
3R-60.360X
Compact Rotary Indexing Tables with pneumatic Macro chuck. Indexing 0-360° with smallest step 0.001°. Air connections for open/close, as well as turbo-locking/air-blast cleaning. Note: The units are controlled by the machine.The mark and type of the machine must therefore be stated when ordering.