Tooling for parts production
416 results for 'Tooling for parts production'
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Manual chuck (low profile), MacroStd
3R-600.28-S
Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.
Pneumatic chuck, MacroHP
3R-600.15-3
Rust resistant pneumatic chuck for permanent mounting on the machine table.
Pneumatic chuck, MacroStd
3R-SP24460
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pnematic chuck, MacroHP
3R-SP26771
Pneumatic chuck for building-in, for example on machine spindle or fixture.
Pneumatic chuck, Macro VDP
3R-602.10-V
Pneumatic vibration-damped chuck, low-profile version for permanent mounting on the machine table.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.