Tooling for EDM
397 results for 'Tooling for EDM'
Manual chuck (low profile), MacroStd
3R-600.28-S
Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.
Manual chuck, MacroHP
3R-600.20
For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.
Manual chuck, MacroStd
3R-610.21-S
Two ground faces for vertical or horizontal mounting on the machine table.
Manual chuck, MacroStd
90842
Two ground faces for vertical or horizontal mounting on the machine table.
Pneumatic chuck (low profile), MacroStd
3R-602.81
Pneumatic chuck for permanent mounting on the machine table.
Pneumatic chuck (low profile), MacroHP
3R-602.81RS
Pneumatic chuck for permanent mounting on the machine table.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 54x54 mm, MacroStd
3R-651.7E-S
Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.