Ref.: 951352018
- EDM Tapping electrodes are used to drill and tap a hole in one operation in very hard materials, with tight tolerances and high productivity demands
- You benefit from more flexibility and better cost-effectiveness
Specs
Specs
Metallic electrodes | |
|---|---|
| Diameter (mm) |
|
| Hole for flushing |
|
| Length thread (mm) |
|
| Length (mm) |
|
| Quantity / Pack |
|
| Thread metric |
|
Variants
Reference | Identifier | Diameter (mm) | Length (mm) | Length thread (mm) | Thread metric |
|---|---|---|---|---|---|
| 951352003 | Tapping WCu electrode, orbital M3 | 2.3 | 80 | 50 | M3 (0.50 mm) |
| 951352004 | Tapping WCu electrode, orbital M4 | 2.9 | 80 | 50 | M4 (0.70 mm) |
| 951352005 | Tapping WCu electrode, orbital M5 | 3.8 | 80 | 50 | M5 (0.80 mm) |
| 951352006 | Tapping WCu electrode, orbital M6 | 4.5 | 80 | 50 | M6 (1.00 mm) |
| 951352008 | Tapping WCu electrode, orbital M8 | 6 | 80 | 50 | M8 (1.25 mm) |
| 951352010 | Tapping WCu electrode, orbital M10 | 7.8 | 80 | 50 | M10 (1.50 mm) |
| 951352012 | Tapping WCu electrode, orbital M12 | 9.4 | 80 | 50 | M12 (1.75 mm) |
| 951352014 | Tapping WCu electrode, orbital M14 | 11.1 | 80 | 50 | M14 (2.00 mm) |
| 951352016 | Tapping WCu electrode, orbital M16 | 13.1 | 80 | 50 | M16 (2.00 mm) |
951352018 | Tapping WCu electrode, orbital M18 | 14.4 | 80 | 50 | M18 (2.50 mm) |
There are no documents available for this product.