Tooling for parts production
416 results for 'Tooling for parts production'
Reference element Ø75 mm, MacroNano
3R-651.75E-N
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Reference element 70x70 mm, MacroNano
3R-601.7-N
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Manual chuck (low profile), MacroStd
3R-600.28-S
Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.