Tooling for wire EDM
144 results for 'Tooling for wire EDM'
Holder, Wire EDM
3R-292.66HP
Can be supplemented with 3Ruler accessories. Note: Mounts on an HP mounting head
Angled holder, Wire EDM
3R-292.23
For clamping a workpiece or fixture on a mounting head. Can be supplemented with 3Ruler accessories.
SuperVice, Macro, Wire EDM
3R-613.4
Vice for mounting rectangular workpieces 0-25 mm in the Macro system.
SuperVice WEDM, Wire EDM
3R-232.8
Vice for mounting rectangular (<60 mm) and round (Ø8-45 mm) workpieces in the WEDM system.
Vice, Macro, Wire EDM
3R-613.6
Vice for mounting rectangular workpieces 0-80 mm in the Macro system. Movable jaws for centred mounting. Can be supplemented with insert 16115-00 for mounting round workpieces 15-55 mm.
V-holder, Macro, Wire EDM
3R-207.6
For clamping round workpieces 8-70 mm, or rectangular workpieces 10-52 mm in the Macro system.
SuperVice, Mini, Wire EDM
3R-213.4
Vice for mounting rectangular workpieces up to 25 mm in the Mini system.
Levelling adapter, Wire EDM
3R-272HP
For manual mounting of SuperVice, a holder or a fixture in the WEDM system. Note: All holders including HP can be mounted. Also fits the ICS system if the clamping jaw (17850-00) is changed.
Presetting stone, Wire EDM
3R-228U
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.
Presetting station, Wire EDM
3R-228.1
Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate, and a check stone. A dial indicator is required.
Presetting kit, Econo, Wire EDM
3R-228E
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.