Ref.: 951401010
- Metallic cylinders, squares, plates etc… are used to form electrodes for EDM Die Sinking machining
- Principal advantages :low wear, high contour sharpness, good machinability
Specs
Specs
Metallic electrodes | |
|---|---|
| Length (mm) |
|
| Quantity / Pack |
|
| Tolerance (mm) |
|
| Dimension |
|
Variants
Reference | Identifier | Dimension | Length (mm) | Tolerance (mm) | Quantity / Pack |
|---|---|---|---|---|---|
951401010 | Square W/Cu 75/25 - 10 X 10 X 200 | 10 X 10 | 200 | +/-0.15 | 1 |
| 951401015 | Square W/Cu 75/25 - 15 X 15 X 200 | 15 X 15 | 200 | +/-0.15 | 1 |
| 951401020 | Square W/Cu 75/25 - 20 X 20 X 200 | 20 X 20 | 200 | +/-0.15 | 1 |
| 951401025 | Square W/Cu 75/25 - 25 X 25 X 200 | 25 X 25 | 200 | +/-0.15 | 1 |
| 951401030 | Square W/Cu 75/25 - 30 X 30 X 200 | 30 X 30 | 200 | +/-0.15 | 1 |
| 951401032 | Square W/Cu 75/25 - 32 X 32 X 200 | 32 X 32 | 200 | +/-0.20 | 1 |
| 951401040 | Square W/Cu 75/25 - 40 X 40 X 200 | 40 X 40 | 200 | +/-0.20 | 1 |
There are no documents available for this product.