Tooling for wire EDM

3R-239.22

Support tab adjusted by -5 mm. For 3Ruler.

3R-239.26

Support bracket adjusted by -5 mm. For 3Ruler.

3R-239.24

For clamping thin workpieces. To be fitted together with zero-line support tab.

3R-A239

Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.

3R-203

Hydraulic locking of set position. Note: For angle setting, 3R-216 is recommended.

3R-201J

Basic element for 3D accessories.

3R-204

Can be turned upwards or downwards when mounting on 3R-201J.

3R-223

Used where vertical or horizontal displacement of workpiece or accessory is necessary.

3R-223.3

Used where vertical or horizontal displacement of workpiece or accessory is necessary.

3R-203.66

Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.

90937

Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.

D-30232

Swivelling element with manual Macro chuck. Display included.