Tooling for parts production

90412.1X

Pneumatic added-on chuck with swivel surrounding unit.

3R-SP24460

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-SP26771

Pneumatic chuck for building-in, for example on machine spindle or fixture.

3R-SP26771-RS

Rust resistant pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-600.84-3

Pneumatic chuck for permanent mounting in the machine spindle.

90412.2X

Pneumatic built-in chuck with swivel in the back.

3R-600.84-30

Pneumatic chuck for permanent mounting in the machine spindle. Note: XYZ-references of hardened and ground steel, larger Z-references. Note: When ordering state machine make and type.;

3R-600.86-3

Pneumatic chuck for permanent mounting in the machine spindle.

3R-600.86-30

Pneumatic chuck for permanent mounting in the machine spindle. Note: When ordering state machine make and type. Note: X/Y/Z references of hardened and ground steel, larger Z-references.

3R-600.22

With setting screws for centring.

3R-600.20

For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.

3R-600.1-30

Pneumatic chuck for permanent mounting on the machine spindle or onto the machine table or as a lathe chuck.