3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-6.600-VHS

For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.

3R-690.1-260

Chuck for permanent mounting on the machine table or into a PM press.

3R-699.20-142D

The pallet can be flipped over to gain access from rear side.

3R-696.1-260

For setting flatness and angular positions. Ground hole for centering.

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-690.1-185-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-SP29998

From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.

3R-696.1-185

For setting flatness and angular positions. Ground hole for centering.

3R-690.1-220

Chuck for permanent mounting on the machine table or into a PM press.