Tooling for EDM

3R-695.2-185

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-695.2-220

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-695.2-260

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-494-S12x50

Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.

3R-494-S22x50

Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.

3R-494-S26x50

Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.

3R-494-S32x50

Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-321.5

Hydraulic chuck for mounting on machine spindle with 3R-A3620.

3R-321-4x90º

Hydraulic chuck for mounting on machine spindle with Midi system.