Tooling for wire EDM

144 results for 'Tooling for wire EDM'

Reference element WEDM, Wire EDM

3R-200.1J-U

Universal 150 mm reference element, with oval holes, for all machines that have M8 holes in the machine table, 30 to 40 mm from the edge of the table.

Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question. Note: When ordering, state machine mark and type.

Reference element WEDM, Wire EDM

3R-200.XJ-X

Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question. Note: When ordering, state machine mark and type.

Can be moved infinitely along the entire reference element.

Reference stop, Wire EDM

3R-225

Can be moved infinitely along the entire reference element.

Chuck adapter with lever for Macro holder in the WEDM system.
Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.

Manual chuck, Macro

3R-602.27-1

Chuck adapter with lever for Macro holder in the WEDM system. Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.