Tooling for powder compacting

90803.50

Pneumatic chuck for permanent mounting in spindle of powder press.

3R-600.17-32

Pneumatic chuck for permanent mounting in spindle of powder press machine.

3R-A34249

For manual Macro chuck, i.e. 3R-600.27-XX

3R-651.75-50E

Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

90506.06

Hardened pallet with clearance holes for fixing screws.

90125.25-05

Includes status indicators.

3R-SP29403

Special Matrix142 drawbar for adapterpallet 3R-SP29388.

3R-SP29388

Adapterpallet Matrix 142 to 3Refix (44/46) for dies.

3R-SP33230

From Matrix 142 into Macro system. Chuck adapter with built-in Macro chuck.

90238

Fixture for punch on Macro, in order to wire-cut a through hole within Ø20 mm.

3R-SSP122

Intended for checking clamping force of Matrix chucks and for those Macro chucks found in compacting machines (due to cramped and limited space inside machine). In order to check Matrix chucks, see additional converter kits 3R-SSP115MATRIX nnn enabling checking.

3R-SSP115MATRIX110

Added kit to enable checking Matrix110 chucks.