Tooling for parts production

3R-612.54-A

Suitable for some Macro chucks with drawbar 3R-605.1.

3R-612.54-S

Suitable for some Macro chucks with drawbar 3R-605.2.

3R-651.75E-P

Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-US90-601

Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.

3R-696.1-142

For setting flatness and angular positions. Ground hole for centering.

3R-695.2-185RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-690.1-185-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-612.116-A

Suitable for some Macro chucks with drawbar 3R-605.1*. Note: Only suitable for Ø116 mm pallets.

3R-612.116-S

Suitable for some Macro chucks with drawbar 3R-605.2*. Note: Only suitable for Ø116 mm pallets.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-6.600-VHS

For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.

3R-406.9

For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.