Tooling for parts production

3R-695.2-220

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-695.2-260

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-614-04

Mainly for MacroCombi and Ø10 3Refix mandrels.

3R-SSP115-BASE

For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.

3R-TXXXX

Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

C250310

For direct installation on a machine table. Mounting holes to be drilled at installation.

C250350

For direct installation on a machine table. Mounting holes to be drilled at installation.

C250010

For simple installation in the machine table or in a baseplate. Specially designed for tower or other applications with lateral load.

S252251

For automated and manual applications. Without AirDisc: with 2 fittings for side connection.

C250050

For simple installation in the machine table or in a baseplate.