Tooling for parts production

3R-446.11

For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.

3R-466.4033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.

3R-466.4033-S

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.10033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.15033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

C188550

Adaption of Macro on GPS 70.

C188560

Adaption of GPS 70 on Macro.

3R-6.321-HS

Electrical spindle for round electrodes.

3R-6.600-VS

For mounting in a Macro chuck. Flushing via flushing connection. For vertical mounting in EDM machines.

3R-6.300-EHS16

For clamping in a vertical Macro chuck. Flushing via flushing connection. Recommended collets - Balzer EHS16, Regofix ER16 or Tecnopinz ETS16.

3R-651.7E-XS

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-658.1E-S

For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.