Tooling for parts production

3R-27.2

For mounting on the machine spindle or on a machine table.

3R-29.2

Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-602.10-V

Pneumatic vibration-damped chuck, low-profile version for permanent mounting on the machine table.

90716.09

Pneumatic vibration-damped chuck for permanent mounting on the machine table.

3R-600.10-3

Pneumatic chuck locked/opened with air gun.

3R-600.10-3RS

Pneumatic chuck locked/opened with air gun.

3R-600.10-30

Pneumatic chuck locked/opened with air gun.

3R-610.46-30

Pneumatic chuck for horizontal or vertical use.

3R-600.1-30V

Pneumatic vibration-damped chuck.

3R-600.24-V

Manual vibration-damped chuck, Ø170 mm.