Tooling for EDM

3R-321-4x90º

Hydraulic chuck for mounting on machine spindle with Midi system.

3R-321.2-4x90

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

3R-463-5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.

3R-310EE

Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.

3R-322-25S

Holder with hardened reference part and unhardened electrode mounting part.

3R-322-100

Holder with hardened reference part and unhardened electrode mounting part.

3R-13.321

Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.

3R-311.4

Chuck Ø20 mm for Ø0.3-3 mm electrodes.

3R-311.2

Chuck Ø20 mm for collets ER20 with electrodes < Ø13 mm.

3R-23

Ground C-reference.