Tooling for EDM

90027.03

Intended for MacroMagnum chucks. Can also be used as a cover for unused chucks.

3R-SP28219-RS

Rust resistant chuck for permanent mounting in the machine table.

3R-695.2-142RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-600.10-3N

Pneumatic chuck for mounting on the machine table.

3R-600.84-3N

Chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-600.86-3N

Chuck for builing-in, for example in a fixture.

3R-610.46-3N

Chuck for mounting on the machine table with integral air unit. For horizontal and vertical use.

3R-651.7E-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651E-N

Hardened with clearance holes for four fixing screws.

3R-601.1E-N

Hardened with clearance holes for four fixing screws.

3R-651.75E-N

Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-601.7-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.