Filter by
Manual adapter, Macro-HSK-63A
3R-SP29745
Access to clamping from underneath. Torque wrench for optimal performance.
Manual chuck adapter, Macro-MacroJunior
3R-446.11
For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.
Manual chuck adapter, Macro-MacroJunior
3R-466.4033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Pallet 52x52 mm, MacroHP
3R-651.3
Hardened, with 3Refix holes, flushing connection and clearance holes for two fixing screws.
Pallet 52x54 mm, Macro
3R-658.31E
Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.
Holder 54x54 mm, Macro
3R-658.2E-S
Unhardened holder for flat electrodes with max width 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Holder 54x54 mm, Macro
3R-658.4E-S
Unhardened holder for square or round electrodes, max 30 mm. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pallet 70x70 mm, Macro
3R-608.31E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.