Tooling for EDM

3R-US90-601

Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.

3R-601.116-75PA

Unhardened palett with reference element 3R-651.75-P.

3R-612.116-S

Suitable for some Macro chucks with drawbar 3R-605.2*. Note: Only suitable for Ø116 mm pallets.

3R-651.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651.7E-S

Hardened reference element for copper electrodes and workpieces. Note: Must be mounted on the copper blank/workpiece before it is locked in a chuck. Note: For graphite electrodes, spacer plate 3R-658.1E-S is required.

3R-605.14E

3R-605.10

3R-605.10E

3R-605.10EE

3R-606.1

For setting angular positions and for centring Macro chucks.

3R-656.1

For setting angular positions. Ground outside diameter for centring.

3R-606

Control rod with ground C-reference for setting Macro chucks.