1918 results for "Wire"

D-30206

Pneumatic built-in chucks for Macro holders. Can also be used in milling and grinding operations without high cutting forces.

3R-200.1J-U

Universal 150 mm reference element, with oval holes, for all machines that have M8 holes in the machine table, 30 to 40 mm from the edge of the table.

3R-200.XJ-X

Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question. Note: When ordering, state machine mark and type.

3R-294.7

Multiple holder for ten workpieces Ø2-20 mm at the same time. Mount direct on table or with a levelling head.

3R-209.3

For clamping round workpieces. To be mounted on EconoRuler.

3R-209.33

For clamping round workpieces. To be mounted on EconoRuler.

3R-293.66HP

For round workpieces Ø15-150 mm diameter, or rectangular workpieces up to 150 mm. Note: Mounts on HP, Magnum or MacroTwin mounting head.

3R-228E

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.

3R-228EI

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate. Note: 3R-228EI delivers with dial indiactor measuring inch.

3R-216.6

For setting angles on swivelling elements. Angles are set with gauge blocks.

3R-207.6

For clamping round workpieces 8-70 mm, or rectangular workpieces 10-52 mm in the Macro system.

3R-266.4

For manual mounting of SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.