Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Reference element Ø142 mm, MacroMagnum
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Drawbar, Matrix220
3R-695.2-220
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Drawbar, Matrix260
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
Manual chuck adapter 90°, Macro-Macro
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
Manual chuck adapter 90°, Macro-MacroJunior
3R-406.9
For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.
Pneumatic chuck, MacroCombi
3R-460.83-2
Pneumatic chuck for mounting directly on the machine spindle. All XYZ-references in hardened and ground steel. Note: When ordering state machine make and type.;
Manual chuck, MacroJunior
3R-410.31-5
Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
Manual chuck, MacroJunior
3R-SP19143
Stainless steel chuck with ground flange Ø22x6 mm for mounting in a fixture or the WEDM system. Axial locking screw with channel for flushing through the electrode.
Pneumatic chuck, MacroCombi
3R-460.86-2
Pneumatic chuck for mounting directly on the machine spindle. All X/Y/Z references in hardened and ground steel. Note: When ordering state machine make and type.
Pneumatic chuck, MacroJunior
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.