Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Clamping force meter kit, Macro
3R-SSP115-BASE
For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.
Lathe taper
3R-TXXXX
Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.
Manual chuck adaper, Midi-Mini
3R-321-4x90º
Hydraulic chuck for mounting on machine spindle with Midi system.
Manual lathe chuck, Mini
3R-321.2-4x90
Hydraulic chuck with set screws, for mounting on a lathe taper.
Manual chuck, MiniBlock, Mini
3R-321.46
Manual hydraulic chuck for vertical or horizontal mounting on the machine table.
Manual chuck adapter, Mini-MacroJunior
3R-463-5033
For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Electrode holder, Mini
3R-310EE
Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.
Electrode holder Ø20 mm, Mini
3R-322-25S
Holder with hardened reference part and unhardened electrode mounting part.
Electrode holder Ø20 mm, Mini
3R-322-100
Holder with hardened reference part and unhardened electrode mounting part.
Electrode holder, Mini
3R-13.321
Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.