Tooling for parts production

3R-901-10E-TX

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-614-06

Mainly for Macro chucks.

3R-610.46-3

Pneumatic chuck for horizontal or vertical use.

3R-SP7359

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-SP7359-RS

Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.

3R-A27634

To convert 3R-600.28-S to enable long drawbar 3R-605.1.

3R-699.20-110D

The pallet can be flipped over to gain access from rear side.

3R-SP31380-RS

Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.

3R-696.1-110

For setting flatness and angular positions.

3R-SP28219-RS

Rust resistant chuck for permanent mounting in the machine table.

3R-695.2-142RS

Note: In automation the gripper has to grip on the pallet and not on the drawbar.

3R-699.20-142D

The pallet can be flipped over to gain access from rear side.