Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Blanks, MacroJunior
3R-494-32x22x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Blanks, MacroJunior
3R-494-40x22x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
Reference tables, 3Refix
3R-936-85.40
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
Slotted bushes, 3Refix
3R-903-20-256
Bushes of hardened spring steel 54 HRC. Outside diameter 25.6 mm
Slotted bushes, 3Refix
3R-903-20-275
Bushes of hardened spring steel 54 HRC. Outside diameter 27.5 mm