Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
Manual chuck, MacroHP
3R-600.20
For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.
Pneumatic chuck, MacroStd
3R-600.1-30
Pneumatic chuck for permanent mounting on the machine spindle or onto the machine table or as a lathe chuck.
Manual chuck, MacroStd
3R-610.21
Three ground faces for vertical or horizontal mounting on the machine table.
Manual chuck, MacroStd
3R-610.21-S
Two ground faces for vertical or horizontal mounting on the machine table.
Manual chuck, MacroStd
90842
Two ground faces for vertical or horizontal mounting on the machine table.
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Pneumatic chuck, MacroHP
3R-SP7359
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroHP
3R-SP7359-RS
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Collet chuck ER20, Matrix110
3R-699.20-110D
The pallet can be flipped over to gain access from rear side.