Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Manual lathe chuck, Mini
3R-321.2-4x90
Hydraulic chuck with set screws, for mounting on a lathe taper.
Manual chuck adapter, Mini-MacroJunior
3R-463-5033
For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3Refix mandrel, 3Refix
3R-901-20RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Reference tables, 3Refix
3R-936-85.40
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
Slotted bushes, 3Refix
3R-903-20.254
Bushes of hardened spring steel 54 HRC. Outside diameter 25.4 mm