Tooling for parts production

3R-TXXXX

Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

S230510

For GPS120 manual chucks C188320 and C530310

C531000

Sealing of unused bores.

C960500

Manual control unit for clamping and releasing pneumatic chucks.

C695176

Chip protection ring for GPS120 chucks when used manually with GPS70 pallets C695050.

3R-936-60.38

Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.

3R-901-10RS

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-901-20E

Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.

3R-903-20.235

Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm

3R-903-20.24

Bushes of hardened spring steel 54 HRC. Outside diameter 24 mm