Tooling for parts production

3R-690.1-185-RS

Rust resistant chuck for permanent mounting on the machine table.

3R-SP29998

From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.

3R-696.1-185

For setting flatness and angular positions. Ground hole for centering.

3R-446.11

For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.

3R-466.4033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.

3R-466.4033-S

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.10033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-466.15033

For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

C188550

Adaption of Macro on GPS 70.

C188560

Adaption of GPS 70 on Macro.

3R-6.321-HS

Electrical spindle for round electrodes.

3R-658.31E

Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.