Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
Pallet 70x70 mm, Macro
3R-608.31E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Reference element 70x70 mm, MacroHP
3R-601.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Pneumatic built-in chuck, Matrix142
3R-SP28219-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix142
3R-695.2-142RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Collet chuck ER20, Matrix142
3R-699.20-142D
The pallet can be flipped over to gain access from rear side.
Collet chuck ER40, Matrix142
3R-699.40-142D
The pallet can be flipped over to gain access from rear side.
Control ruler, Matrix142
3R-696.1-142
For setting flatness and angular positions. Ground hole for centering.
Drawbar, Matrix185
3R-695.2-185RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Sealing ring, Low, Macro
3R-612.116-S
Suitable for some Macro chucks with drawbar 3R-605.2*. Note: Only suitable for Ø116 mm pallets.