Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Slotted bushes, 3Refix
3R-903-20.235
Bushes of hardened spring steel 54 HRC. Outside diameter 23.5mm
3Refix mandrel, 3Refix
3R-901-20RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Reference tables, 3Refix
3R-936-85.40
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
Slotted bushes, 3Refix
3R-903-20-256
Bushes of hardened spring steel 54 HRC. Outside diameter 25.6 mm
Slotted bushes, 3Refix
3R-903-20-275
Bushes of hardened spring steel 54 HRC. Outside diameter 27.5 mm
Pallet with HCP robot grip, Dynafix
3R-771.2-HCP
Milled pallet with HCP robot grip mounted on pallet side.
Pneumatic chuck, GPS240
C219110
Pneumatic table chuck, mainly intended for applications in die-sinking EDM machines.