Tooling for EDM

3R-463-5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.

3R-310EE

Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.

3R-322-25S

Holder with hardened reference part and unhardened electrode mounting part.

3R-322-100

Holder with hardened reference part and unhardened electrode mounting part.

3R-13.321

Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.

3R-311.4

Chuck Ø20 mm for Ø0.3-3 mm electrodes.

3R-460.83-2

Pneumatic chuck for mounting directly on the machine spindle. All XYZ-references in hardened and ground steel. Note: When ordering state machine make and type.;

3R-410.31-5

Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.

3R-314.2

For setting angular positions.

3R-3.321-2

For measuring centre holes.

3R-301

For angular fixing of Mini holders.