Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix260
3R-690.1-260
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Measuring probe, Macro
3R-656.31-5P
Measuring probe with Renishaw measuring head for machines with measurement cycle function. Max ball deflection: X-Axis ±10° Y-Axis ±10° Z-Axis ±3 mm.
Measuring probe, Macro
3R-656.21-SP03
Measuring probe with measuring head for machines with measurement cycle function.
Splash guard, Macro
90027
Splash guard for Macro chucks with long drawbar. Can also be used as a cover for unused chucks. Note: Does not work with sealing ring 3R-612.116.
Manual chuck, MacroHP
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.