Tooling for wire EDM
144 Ergebnisse für 'Tooling for wire EDM'
Holder, Wire EDM
3R-292.66HP
Can be supplemented with 3Ruler accessories. Note: Mounts on an HP mounting head
Angled holder, Wire EDM
3R-292.23
For clamping a workpiece or fixture on a mounting head. Can be supplemented with 3Ruler accessories.
SuperVice, Macro, Wire EDM
3R-613.4
Vice for mounting rectangular workpieces 0-25 mm in the Macro system.
SuperVice WEDM, Wire EDM
3R-232.8
Vice for mounting rectangular (<60 mm) and round (Ø8-45 mm) workpieces in the WEDM system.
Vice, Macro, Wire EDM
3R-613.6
Vice for mounting rectangular workpieces 0-80 mm in the Macro system. Movable jaws for centred mounting. Can be supplemented with insert 16115-00 for mounting round workpieces 15-55 mm.
Fixed mounting head, Macro
3R-266.5
For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.
Levelling adapter, MacroTwin
3R-282.12HP
For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted.
Fixed mounting head, MacroTwin
3R-266.12HP
For manual mounting of Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted
Presetting stone, Wire EDM
3R-228J
Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.
Presetting stone, Wire EDM
3R-228U
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.
Presetting kit, Econo, Wire EDM
3R-228E
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.