Tooling for EDM
397 Ergebnisse für 'Tooling for EDM'
Spacer plate 54x54 mm, Macro
3R-658.1E-S
For graphite electrodes or copper electrodes/workpieces with a rough mounting surface. To be mounted on 3R-651.7E-S, 3R-651.7E-XS or 3R-651.7E-P.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Pallet 52x54 mm, Macro
3R-658.31E
Unhardened with 3Refix holes and two M5 threads. Designed to be mounted on 3R-651.3.
Pneumatic chuck, Matrix260
3R-690.1-260
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Pallet 70x70 mm, MacroHP
3R-601.3
Hardened with 3Refix holes, flushing connection and clearance holes for six fixing screws.
Reference element 54x54 mm, MacroHP
3R-651.7E-P
Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.