Tooling for EDM

3R-651.13

Hardened holder for square electrodes max 30 mm.

C522830

Chuck adapter with built-in pneumatic GPS70 chuck for mounting in: C219800 for automated pallet change GPS70. C219000, C219100, C219110, C219200 for manual pallet change GPS70; Open/Close GPS70 with air gun.

3R-601.7E-P

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-601.1E-P

Hardened, with clearance holes for four fixing screws.

3R-601.3

Hardened with 3Refix holes, flushing connection and clearance holes for six fixing screws.

3R-651.70-P

Unhardened palett with reference element 3R-651.7-P.

3R-651.70-XS

Unhardened palett with reference element 3R-651.7-XS.

3R-612.54-A

Suitable for some Macro chucks with drawbar 3R-605.1.

3R-612.54-S

Suitable for some Macro chucks with drawbar 3R-605.2.

3R-651.75E-P

Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-US90-601

Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.

3R-601.116-75PA

Unhardened palett with reference element 3R-651.75-P.