Tooling for EDM

3R-863.25-10

With pre-programmed unique identity, designed for MacroJunior 25 mm, 3R-491E.

3R-SSP115-BASE

For both pneumatic and manual chucks. This stand alone unit in combination with individual drawbars or drawbar kits, able to cover MacroJunior, Macro, MacroMagnum and Dynafix. Note: Require drawbars with bayonet interface similar to 3R-605.1.

3R-SSP115-JUN

Added kit to enable checking MacroJunior chucks.

3R-TXXXX

Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-321.5

Hydraulic chuck for mounting on machine spindle with 3R-A3620.

3R-321-4x90º

Hydraulic chuck for mounting on machine spindle with Midi system.

3R-321.2-4x90

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

3R-463-5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.