Tooling for EDM

3R-322-50E

Holder with hardened reference part and unhardened electrode mounting part.

3R-600.24-4RS

Rust resistant chuck for Macro holder. Mounts on a suitable fixture.

3R-6.600-VHS

For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.

3R-23

Ground C-reference.

3R-400.24-11

For mounting on machine spindle.

3R-410.1-M

For mounting on the machine spindle or in a fixture on the machine table.

3R-460.34

For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.

3R-400.34

For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.

3R-460.32

For mounting on a lathe taper.

3R-460.31-5

Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table.

3R-460.37

The locking mechanism is operated by a removable handle.

3R-494-D26x50

Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.