Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
3Refix mandrel, 3Refix
3R-901-10E-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Pneumatic chuck, MacroHP
3R-SP7359
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Pneumatic chuck, MacroHP
3R-SP7359-RS
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
Manual chuck adapter, Macro-MacroJunior
3R-466.10033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
Manual chuck adapter, Matrix110-Ø20
3R-SP31380-RS
Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.
Pneumatic built-in chuck, Matrix142
3R-SP28219-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix142
3R-695.2-142RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
Rotating spindle, Macro
3R-6.600-VS
For mounting in a Macro chuck. Flushing via flushing connection. For vertical mounting in EDM machines.