Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
Manual chuck, MacroHP
3R-600.20
For mounting on the machine spindle with 3R-A3620 or on a lathe taper with centring ring 3R-612.6.
Manual chuck, MacroStd
3R-610.21
Three ground faces for vertical or horizontal mounting on the machine table.
Control ruler, Matrix142
3R-696.1-142
For setting flatness and angular positions. Ground hole for centering.
Manual chuck, MacroStd
90842
Two ground faces for vertical or horizontal mounting on the machine table.
Pneumatic chuck (low profile), MacroStd
3R-602.81
Pneumatic chuck for permanent mounting on the machine table.
Pneumatic chuck adapter, Matrix185-Macro
3R-SP29998
From Matrix185 into Macro system. Chuck adapter with built-in Macro chuck.
Control ruler, Matrix185
3R-696.1-185
For setting flatness and angular positions. Ground hole for centering.
Pneumatic chuck, Matrix220
3R-690.1-220
Chuck for permanent mounting on the machine table or into a PM press.
Pneumatic chuck, Matrix220
3R-690.1-220-RS
Rust resistant chuck for permanent mounting on the machine table.
Pneumatic built-in chuck, Matrix220
3R-SP28340-RS
Rust resistant chuck for permanent mounting in the machine table.
Drawbar, Matrix220
3R-695.2-220RS
Note: In automation the gripper has to grip on the pallet and not on the drawbar.