Tooling for parts production
416 Ergebnisse für 'Tooling for parts production'
Pneumatic chuck, Matrix220
3R-690.1-220
Chuck for permanent mounting on the machine table or into a PM press.
Reference element Ø75 mm, Macro
3R-651.75E-P
Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
Gate chuck, Macro
3R-US90-601
Fixed index positions at 0, 30, 45, 60 and 90 degrees. Other angles are set with a sine rule.
Control ruler, Matrix220
3R-696.1-220
For setting flatness and angular positions. Ground hole for centering.
Pallet, Ø116 mm, Macro
3R-608.51E
Unhardened with 3Refix holes and four M6 threads. Designed to be mounted on 3R-601.3 or 3R-601.52.
Pneumatic built-in chuck, Matrix260
3R-SP28345
Chuck for permanent mounting in the machine table or into a PM press.
Control ruler, Matrix260
3R-696.1-260
For setting flatness and angular positions. Ground hole for centering.
Pallet, Maxi
3R-29.2
Pallet with 16 clearance holes for M6 screws and eight M6 threads. Also works as a control ruler to set location of center.
Sealing ring, Low, Macro
3R-612.116-S
Suitable for some Macro chucks with drawbar 3R-605.2*. Note: Only suitable for Ø116 mm pallets.