Tooling for powder compacting
45 Ergebnisse für 'Tooling for powder compacting'
Index blocker-pin, Matrix142 and Matrix185
3R-SP29533E
To disable indexing feature on Matrix142 and Matrix185 chucks.
Index blocker-pin, Matrix220 and Matrix260
3R-SP29559E
To disable indexing feature on Matrix220 and Matrix260 chucks.
Lifting device, Matrix110 and Matrix142
3R-692.8-142
In combination with 3R-692.7-110 and 3R-692.7-142 to enable lift by crane.
Lifting device, Matrix185 and Matrix220
3R-692.8-220
In combination with 3R-692.7-185 and 3R-692.7-220 to enable lift by crane.
Punch alignment system
D-20158-BASE
This fixture enables adjustment of punches within metal powder compacting by Macro system. The fixture is a stand-alone unit. It is possible to replace the indicators with electrical sensors. Free access from underneath, to access fixation-screws for the pallets.
3Refix PM mandrel, Ø20 mm, 3Refix
3R-901-20PM-TX
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.
Pneumatic chuck, Macro PM
3R-600.17-60
Pneumatic chuck for permanent mounting in spindle of powder press machine.
Manual chuck (built-in) Ø80, Macro PM
3R-600.27-60
Manual chuck for permanent mounting in spindle of powder press machine.